컨텐츠 바로가기


product


이전 제품 보기

다음 제품 보기

크게보기

[P0000EFN] RetroArms CNC Gearbox Ver.2(New Gen) 적립금

() 해외배송 가능

RetroArms CNC Gearbox Ver.2(New Gen) 기본 정보
판매가
소비자가 0원
적립금
  • 2,990 (1.00%)
  • 무통장 결제시 적립금 ( %) 무
  • 카드 결제시 적립금 ( %) 카
  • 실시간 계좌 이체시 적립금 ( %) 실
  • 적립금 결제시 적립금 ( %) 적
  • 휴대폰 결제시 적립금 ( %) 휴
무이자할부
제조사 RetroArms
원산지 CZECH(체코)
상품코드 P0000EFN
수량

updown

국내/해외배송
SNS 상품홍보
QR코드  

이미지저장 | 코드URL복사

QR코드 보내기 페이스북으로 보내기 트위터로 보내기 미투데이로 보내기 요즘로 보내기

장바구니 담기 관심상품 등록 추천 메일 보내기

쇼핑 계속하기 바로 구매하기

event

상품상세정보

유럽의 정밀 공업국인 체코제 알루미늄 7075 절삭 가공 기어박스 입니다.

미국에서는 기어박스 전면 파손시 평생 A/S가 가능하다고 합니다.

그만큼 강력한 놈이라고 합니다.

무게 또한 아연제보다 훨씬 가볍습니다.




부싱은 8mm를 쓰면 됩니다. 로넥스제 8mm 부싱 혹은 탭형식의 볼베어링 중 사용하시면 됩니다. (Lonex 듀얼 스틸 부싱 내장 & 강화 터펫 내장)


이 기어박스 채택시 내구성도 좋아지지만, 전체적인 총의 무게가 확연히 줄어듭니다.

일반 아연제 기어박스 깨진 것도 CNC 버젼보다 무겁지요^^ 그만큼 경량화에 최고!! 입니다.


 

CNC airsoft gearbox v2 - QSC (NEW GEN)

Remade and upgraded CNC gearbox from Retro ARMS with code name "7075 series".

Gearbox version II is completly milled at CNC machining center. Compared to other aluminium gearboxes, our is made out of solib block of aluminium AW EN7075 T651. Source block weighs 1550g and only 143g of material are left. It is not casted like Chinese ones! Our gearbox is tested wit M160 spring without any signs off wear or breaking long term. Gearbox's surface is decoratively anodized.

It's available with slots for 8mm. Bearings are not included. You can choose them from our offer here.

Gearbox is equipped with quick spring change system - QSC. Our CNC spring guide is included.

New features and upgrades:

  • reduction of wall thickness - it can be used in most of M4 guns without problems
  • reduction of plugs for cylinder head (1) - cylinder heads from all makers can be used
  • сделаны for bigger air flow (2)
  • control window for AOE (3)
  • control window for piston position check (4)
  • removing of radiuses around place for trigger contacts - ASCU contacts can now be used without problems (5)
  • widening of hole for central pin - gearbox can be installed into non-standard bodies e.g. PJ (6)
  • windows for lubing gears (7)
  • opening for releasing anti-reversal latch (8)
  • remade holes for using screws with cylindrical heads + new strength screws (9)
  • new wrought threads - compared to old cut ones
  • go-through window for cables under motor post (10)
  • milled shoulder above motor cables under motor post (11)
  • more edges bevelled by machine
  • adjusted front part of the gearbox allowing use of more Hop Up Chamber types (12)
  • new strength screws

All standard parts for gearbox version II can be used of course. Both halves fit together with absolute precision including bearing holes,
which are 100% co-axial.

Further small features:

  • accurate hole for Anti-Reversal Latch - it doesn't fall out
  • accurate hole for trigger - it doesn't jump out even with strong spring
  • micro grooves on pins, which hold trigger trolley spring a tappet plate spring - springs don't jump out

Package includes 1 x gearbox version II, 2 x screw M2.5 x 3, strength screws, CNC spring guide and Retro ARMS sticker.

Gearbox comes with lifetime guarantee against breaking. It doesn't relate to breaking caused by misused parts, e.g. improper cylinder head.

We try to adjust our gearboxes as much as possible to allow use of the widest variety of part brands. However we still recommend to use Retro ARMS spare parts, because they are the most compatible.

We can´t recomended to use our gearboxes in Classic Army Guns due to problems with compatibility.

Gearbox installation requires technical knowledge and skills.

Gearbox review from Brill Armory

배송 정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :


상품 사용 후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

모두 보기 사용 후기 쓰기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

상품의 사용후기
번호 카테고리 제목 작성자 작성일 조회
2 비밀글 호환문의 [1] 신동현 2017-03-06 6
1 문의드립니다. HIT[1] 최석환 2016-09-05 406

모두 보기 상품 Q & A 쓰기